Report Configuration Tool command reference
(raidinf commands)
This section describes the raidinf commands, symbols, and reports.
raidinf command list and command description
The following lists the raidinf commands and symbols.
Table 42: raidinf command list
Command
raidinf add report
raidinf delete report
raidinf download report
raidinf get reportinfo
Table 43: Conventions of the command format
Symbol
< >
|Vertical bar
[ ]Square brackets
{ }Curly brackets
raidinf command syntax
The syntax of the raidinf commands and the basic format of the options and parameters are described
next.
Syntax
138
Report Configuration Tool command reference (raidinf commands)
Description
Creates a report.
Deletes a report.
Downloads a report.
Displays a list of reports.
Description
The item enclosed in this symbol is variable.
Symbol is placed between multiple items to indicate "or". For
example:-A | -B Specifies -A or -B.
The enclosed item can be omitted. If some items are delimited by
the vertical bar, specify one or omit all items.For example:[ -
A ]Specifies nothing or specifies -A.[ -a | -b ]Specifies
nothing or specifies -a or -b.
The meaning differs depending on the enclosed item.
•
If items in curly brackets are delimited by vertical bars, one of the
items must be specified.For example:{ -A | -B |-
C }Specifies -A, -B, or -C.
•
If curly brackets enclose items enclosed by square brackets, at
least one of the items must be specified.For example:{ [ -A ]
[ -B ][ -C ]}Specifies one or more items from -A, -B, or -C.