Raidinf Get Reportinfo - HPE XP P9000 User Manual

Option
servername
<hostname/ipaddress>
{-report <report_name> | -
report_id <report_id>}
-targetfolder
<folder>
Examples
Downloads the most recently created report.
# raidinf download report -servername 10.213.74.121
-report LatestReport -targetfolder C:\tmp
Report_101009-CreateConfigurationReport.tgz is downloaded to C:\tmp.
This example specifies the report name 101009-CreateConfigurationReport and downloads the
report.
# raidinf download report -servername 10.213.74.121
-report 101009-CreateConfigurationReport -targetfolder C:\tmp
Report_101009-CreateConfigurationReport.tgz is downloaded to C:\tmp.

raidinf get reportinfo

The raidinf get reportinfo command displays a list of reports.
Reports created using Remote Web Console are also displayed. A report currently being created cannot
be downloaded.
Syntax
raidinf get reportinfo –servername <hostname/ipaddress>
Options and parameters
Description
Specifies the host name or the IP address of the Web server (SVP).
Specifies either -report or -report_id.
•
-report
: specifies a report name within 32 characters. If you specify more
than 32 characters, the 33rd and subsequent characters are
ignored.If a special name LatestReport is specified as a report
name, the report created on the newest date is downloaded.To
download another report having the same name as the special
name "LatestReport," specify the relevant report ID in -report_id. If
multiple reports of the same name exist, the report of the newest
date is the target of download.
•
-report_id
: specifies a report ID displayed by the report list. As a report ID is
a unique ID to each of the reports, a specific report can be
identified even if reports of the same name exist.
Specifies a folder name to which a report is downloaded. The folder
whose name you specify must already exist and you have permissions
to the folder.
Report Configuration Tool command reference (raidinf commands) 143