HPE XP P9000 User Manual page 226

Item
External User Group
Mapping - Re-enter
Password
Secondary Server
Secondary Server - Host
Name
Secondary Server - Port
Number
Test User Name
Password
Server Configuration Test
Server Configuration Test -
Result
226 Remote Web Console GUI reference (main window)
Description
Re-enter the password of the user group you are searching for to confirm
your entry.
You can specify ASCII code characters and the following symbols:! # $ %
and ' ( ) * + - . = @ \ ^ _ |If you enter any password in External User
Group Mapping - Password, you must specify this item.
Specify whether to use a secondary LDAP server.
• Enable
: Uses a secondary LDAP server.
• Disable
: Does not use a secondary LDAP server.
If you select Enable in DNS Lookup, this item is disabled.
Specify a host name of the secondary LDAP server.
You can specify ASCII code characters, hyphens (-), and periods (.).If you
select Disable in Secondary Server, this item is disabled.
Specify a port number of the secondary LDAP server.
If you select Disable in Secondary Server, this item is disabled.
Specify a user name for a server connection test.
You can specify ASCII code characters and the following symbols:! # $ %
and ' * + - . / = ? @ ^ _ ` { | } ~
Specify a password of the user name for a server connection test.
You can specify ASCII code characters and the following symbols:! # $ %
and ' ( ) * + , -. / : ; < = > ? @ [ \ ] ^ _` { | } ~
Click Check to conduct a server connection test for the authentication
server and the authorization server based on the specified settings.
Displays a result of the server connection test for the authentication
server and the authorization server.