Returning An Smi-S Provider Configuration File To Default - HPE XP P9000 User Manual

If SSL communication has been established, the Security Alert dialog box opens before the login
dialog box. Click OK. If the Security Alert dialog box regarding the certificate opens at other times,
ensure that the certificate is correct and then click Yes.
4. In the login dialog box for Upload Configuration Files for SMI-S, enter the administrator's user ID and
password, and click Login. The Upload Configuration Files for SMI-S opens.
5. In the upload dialog box for Upload Configuration Files for SMI-S, specify the SMI-S provider
configuration file (user-defined.properties).
Enter a file name in Configuration file. Alternatively click Browse and then select a file on the
displayed dialog box.
6. Click Upload. The execution confirmation dialog box for Upload Configuration Files for SMI-S opens.
7. Click OK to update the configuration file. Update of the configuration file starts.
Upon completion of the configuration file update, the SMI-S provider restarts to reflect the update.
Upon completion of the restart of the SMI-S provider, the update completion dialog box for Upload
Configuration Files for SMI-S opens.
8. In the Upload Configuration Files for SMI-S dialog box, click OK. The display returns to the login
dialog box.
In some cases, the Security Alert dialog box regarding the certificate may display before the login
dialog box Click View Certificate to confirm that the certificate is correct and then click Yes.
NOTE: If an error occurs during update of the certificate, an error message displays. Resolve the problem
and then run the procedure again, starting with logging in, to update certificate files for SMI-S.

Returning an SMI-S provider configuration file to default

You can return the configuration file updated in Uploading an SMI-S provider configuration file on
page 31.
To return the configuration file to default:
Procedure
1. Terminate all instances of Storage Navigator that are connected to the SMI-S provider.
2. From a PC on which Storage Navigator operates, start a Web browser.
3. Specify the following URL to open the Tool Panel dialog box.
https://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
4. In the Tool Panel dialog box, click Update Configuration Files for SMI-S. The login dialog box for
Upload Configuration Files for SMI-S opens
If SSL communication has been established, the Security Alert dialog box opens before the login
dialog box. If so, click OK. If the Security Alert dialog box regarding the certificate opens at other
times, click View Certificate to confirm that the certificate is correct and then click Yes.
5. In the login dialog box for Upload Configuration Files for SMI-S, enter the administrator's user ID and
password, and click Login. The upload dialog box for Upload Configuration Files for SMI-S opens.
6. In the upload dialog box for Upload Configuration Files for SMI-S, click Return to the default
configuration. The execution confirmation dialog box for Upload Configuration Files for SMI-S opens.
7. Click OK to update the configuration file. Update of the configuration file starts.
32 Setting up Remote Web Console