Configuring E-Mail Notification - HPE XP P9000 User Manual

Table 14: SIM reference codes reported by e-mail
Reference code
SIM 22 SIM 23 SIM 13
7F F7 xx
7F F8 xx
7F F9 xx
60 00 xx
60 2x xx
62 0x xx
62 1x xx
62 2x xx
62 6x xx

Configuring e-mail notification

Prerequisites
• You must have a Security Administrator account with an Initial Configuration role to perform this task.
• You must have a mail server that supports the Simple Mail Transfer Protocol (SMTP).
• If a firewall is used, port 25 must be used.
Procedure
1. Click Settings > Environmental Setting > E-mail Information. The E-mail Information window
opens.
2. Click to change to Modify mode.
3. Select Enable in Mail Notice.
4. Select IPv4, IPv6, or Host Name, and enter the IP address or host name of the mail server.
5. In SMTP-AUTH, select Enable to use SMTP authentication. Enter the account and password for
SMTP authentication.
Select Disable not to use SMTP authentication.
6. Enter addresses in the From Address (required) and Return Address (optional).
Description
Expiration.
Exceeded the licensed capacity.
Software invalidated by the expiration of the
prerequisite software.
Exceeded the pool usage threshold.
Pool blockade.
Exceeded the pool usage warning threshold.
Exceeded the pool usage system threshold.
Pool became full.
Exceeded the pool usage depletion threshold.
Configuring the Remote Web Console environment
Alert level
License key SERIOUS
SERIOUS
SERIOUS
Failure with MODERATE
paired volumes
Snapshot Pool MODERATE
or Fast Snap
Pool
Thin MODERATE
Provisioning
Pool
MODERATE
MODERATE
MODERATE
67