Table of Contents
Advertisement
Item
Unlocked
Locked
View
Modify
Reset
Logged in as
Logout
Apply
Cancel
PP Status
Opening Remote Web Console secondary windows
Some Remote Web Console operations are performed through secondary windows that use a Java
application. For this reason, whether you are using JRE 5.0 or 6.0, a message might appear and ask if
you want to run a Java Application. You might see slightly different dialog boxes depending on your
environment and configuration.
252
Remote Web Console GUI reference (secondary windows)
Description
Indicates the current operational mode of Remote Web Console. If all logged in
users are currently working in the view mode, the blue unlocked-shaped icon (
appears. If any user is working in the Modify mode, the red locked-shaped icon
(
) appears.
NOTE: The operational status might not be displayed correctly when the exclusive
lock is effective or SVP maintenance is in progress.
Allows users to switch the operation mode between Modify and View. The button
always shows the current user operation mode. To change the modes, click the
button. You cannot switch to the Modify mode while any other user is operating in
the Modify mode. Make sure to confirm the exclusive lock icon before switching to
the Modify mode.
Reset the remaining time for the Modify mode. Appears only when you are in Modify
mode.
Shows the user ID of the currently logged-in user.
Closes the Remote Web Console secondary window.
Implements all the changes or settings displayed in blue bold italics. This button is
available only in Modify mode.You can create and store up to 20,000 settings or
operations before actually applying them to the storage system. To avoid a possible
error, do not apply more than 20,000 settings at a time.
Cancels the changes or settings made on the window. This button is available only
in Modify mode.
Displays the SIM severity level. PP Status appears if a SIM occurs related to a
software license because the license is expired or the licensed capacity is
insufficient. However only the storage administrator with the Storage Administrator
role set to Enable will be able to see the display.PP Status can display any of the
following SIM severity level statuses:
•
If PP Status: Normal appears, no SIM has occurred. If any other status appears,
view either the License Key window or the Alerts window to identify which
software has a problem. You may find that you need to consider purchasing the
license.
•
When multiple SIMs occur, only the SIM with the highest severity appears.
)
Advertisement
Table of Contents
