Table of Contents
Advertisement
Role
Storage Administrator
Storage Administrator
Storage Administrator
Support Personnel
User Maintenance
Notes:* Remote copy operations from Remote Web Console require all of the following roles: For
Continuous Access Synchronous or ESAM: - Storage Administrator (System Resource Management)
role - Storage Administrator (Provisioning) role - Storage Administrator (Remote Copy) role For
Continuous Access Synchronous for Mainframe, Continuous Access Journal or Continuous Access
Journal Z - Storage Administrator (System Resource Management) role - Storage Administrator
(Remote Copy) role
CAUTION: If a user has All Resource Groups Assigned set to Yes, the user can access all the
resources in the storage system. For example, if a user is a security administrator and a storage
administrator taking care of some resources, have all resource groups assigned, and has roles of
Security Administrator (View & Modify) and Storage Administrator (View & Modify), the user can edit
the storage for all the resources. If this is a problem, the recommended solution is to register the
following two user accounts in Remote Web Console, and use these different accounts for different
purposes
•
A security administrator user account that has All Resource Groups Assigned set to Yes.
•
A storage administrator user account that does not have all resource groups assigned and has
only some of the resource groups assigned.
CAUTION: For the user groups whose roles are other than the Storage Administrator, All Resource
Groups Assigned is automatically set to Yes. If you delete all the roles except the Storage
Administrator, reassign resource groups to the user group because All Resource Groups Assigned
is automatically set to No. To assign resource groups to the user group, see Changing resource
groups assigned to a user group on page 63.
NOTE: Normally, the Support Personnel role is assigned to a Hewlett Packard Enterprise service
representative, but if the role is assigned to a user account, dump files can be downloaded using the FD
Dump tool.
50
Setting up and managing user accounts
Permissions
Capabilities
Performance
•
Configuring monitoring
management
•
Starting and stopping monitoring
Local copy
•
Performing pair operations for local copy
•
Configuring environmental settings for local copy
•
Splitting Auto LUN V2 pairs when using RAID Manager
Remote copy
Remote copy operations in general*
View & Modify Configuring SVP
•
Normally, this role is for Hewlett Packard Enterprise
service representative.
•
Downloading dump files using the FD Dump tool.
View & Modify Configuring the SVP
Advertisement
Table of Contents
