Table of Contents
Advertisement
Item
Authentication Protocol
Host Name
Secret
Re-enter Secret
NAS Address
Port Number
Timeout
Number of Retries
Secondary Server
Description
Specify a RADIUS protocol to use.
•
PAP: Password authentication protocol that transmits plaintext user ID and
password.
•
CHAP: Challenge-handshake authentication protocol that transmits
encrypted password.
Specify a name of the RADIUS server.
You can specify ASCII code characters, hyphens (-), and periods (.).
Specify a RADIUS secret key used for the PAP authentication or the CHAP
authentication.
You can specify ASCII code characters and the following symbols:! # $ % and
( ) * + - . = @ \ ^ _ |
Re-enter the RADIUS secret key to confirm your entry.
You can specify ASCII code characters and the following symbols:! # $ % and
( ) ' * + - . = @ \ ^ _ |
Specify an identifier for the RADIUS server to find SVP.
•
To specify a host name, select Identifier, and enter the host name.You
can specify ASCII code characters and the following symbols:! " # $ % and
( ) * + , - . / ; : < > = ? @ [ \ ] ^ _ { } ~
•
To specify an IPv4 address, select IPv4 and enter 4 numbers (0-255).For
example:XXX.XXX.XXX.XXX (X indicates a digit) Specify only numbers.
Do not specify any periods.
•
To specify an IPv6 address, select IPv6 and enter 8 hexadecimal numbers
(0-FFFF).For
example:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates
a hexadecimal digit) Enter 0 to omit a segment.
Specify a port number of the RADIUS server.
Specify the number of seconds before connection to the RADIUS server
times out.
Specify the retry times when the connection to the RADIUS server fails.
Specify whether to use a secondary RADIUS server and a secondary LDAP
server.
•
Enable: Uses secondary servers.
•
Disable: Does not use secondary servers.
Remote Web Console GUI reference (main window)
Table Continued
231
Advertisement
Table of Contents
