Table of Contents
Advertisement
•
Navigate to Tools > Internet Options > Advanced, and clear the Do not save encrypted pages to
disk check box.
•
Navigate to Tools > Internet Options > Security, and register the URL of the SVP.
For more information on configuring these settings, see the Internet Explorer help documentation.
Setting up TCP/IP for a firewall
To connect the Storage Navigator computer and the SVP through a firewall, configure the firewall so that
the TCP/IP port for the protocol you use becomes available.
When attaching Remote Web Console to multiple storage systems, the installer must log in to the SVP of
each storage system using separate Remote Web Console sessions and separate Web browser
instances.
Table 5: Firewall configuration
Protocol
HTTP
HTTPS
HTTPS(raidinf)
RMI
RMI
RMI
SMI-S
SMI-S
1
SNMP
1
SNMP Trap
RAID Manager
RAID Manager
1
Required if you use a Remote Web Console Web client as an SNMP manager.
2
For details about port numbers that are used for communication between a host and an SVP using
RAID Manager, see the HPE XP7 RAID Manager User Guide.
Configuring the Web browser
To configure the client Web browser, note the following:
26
Setting up Remote Web Console
Port number
Direction of communication
80
From the Remote Web Console Web client to the SVP
443
5443
1099
51099
51100
427
5989
161
162
From the SVP to the Remote Web Console Web client
2
31xxx
From a host to the SVP
2
34xxx
From the SVP to a host
Advertisement
Table of Contents
