Table of Contents
Advertisement
Prerequisites
•
You must have Security Administrator (View & Modify) role to perform this task.
•
A user group name consists of 1 to 64 characters, including alphanumeric characters (ASCII), spaces,
and the following symbols: ! # $ % and ' ( ) + - . = @ [ ] ^ _ ` { } ~
•
The system can support a maximum of 256 user groups, including the built-in user groups.
Procedure
1.
In the tree, click Administration > User Groups.
2.
In the User Groups tab, click Create User Groups to open the Create User Group window.
3.
Enter a user group name.
4.
If you use an authorization server, click Check, and verify that the entered user group name is
registered in the authorization server.
5.
Click Next to open the Assign Roles window.
6.
Select the roles to assign to the user group, and click Add.
7.
Click Next to open the Assign Resource Groups window.
8.
Select the resource groups to assign to the user group, and click Add.
NOTE: If you select a role other than the storage administrator in the Assign Roles window, you do
not need to select resource groups because all the resource groups are assigned automatically.
9.
Click Finish.
Clicking Next allows you to add a user.
10. Specify a task name, and click Apply.
Managing user accounts
This topic provides instructions for the following tasks:
•
Creating user accounts on page 53
•
Changing user passwords on page 55
•
Changing user permissions on page 56
•
Disabling user accounts on page 57
•
Deleting user accounts on page 57
Creating user accounts
This topic explains how to create a user account and register the account to a user group with appropriate
permissions.
To create a user account:
Setting up and managing user accounts
53
Advertisement
Table of Contents
