Table of Contents
Advertisement
Parameter name
PoolIDForSnapshot
DefaultSnapshotFunction
CipherSuites parameter
Use the CipherSuites parameter to specify usable cipher suites (encryption algorithms). All cipher
suites that can be set are specified by default.
The CipherSuites parameter can use any of the following values:
•
SSL_RSA_WITH_RC4_128_SHA
•
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
•
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
•
TLS_RSA_WITH_AES_128_CBC_SHA
•
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
•
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
•
SSL_RSA_WITH_3DES_EDE_CBC_SHA
Setting up the CipherSuites parameter
Connect cipher suites with a comma (,) as a delimiter.
Example
CipherSuites=SSL_RSA_WITH_RC4_128_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
SSL_RSA_WITH_3DES_EDE_CBC_SHA
VVolForSnapshot parameter
Use the VVolForSnapshot parameter to specify virtual volumes that the SMI-S provider can use when
you operate Fast Snap or Copy-on-Write Snapshot from CreateElementReplica of the
ReplicationService.
All virtual volumes are specified by default.
Setting up the VVolForSnapshot parameter
Set up the parameter by using <RangeOfVVol> and <SingleVVol> with a comma (,) as a delimiter:
146
SMI-S provider configuration file
Description
Specifies pools that can be used by the SMI-S provider.
Optional item. If no value is specified, the default value applies. If you
specify this item, be sure to specify VVolForSnapshot as well.
For parameter details, see PoolIDForSnapshot parameter on page 147.
Specifies which of Thin Image and Copy-on-Write Snapshot is enabled.
Optional item. If no value is specified, the default value applies.
For parameter details, see DefaultSnapshotFunction parameter on page
148.
Advertisement
Table of Contents
