Table of Contents
Advertisement
Prerequisites
SMI-S Provider software application must be installed.
Procedure
Procedure
1. Create a Remote Web Console user account in the management software. The user account must
belong to one of the following built-in user groups:
•
Storage Administrator (View & Modify) User Group.
Users have full permissions to access the SMI-S function from the management software.
•
Storage Administrator (View Only) User Group.
Users have read- only permissions to access the SMI-S function from the management software.
2. In the management software program, enter the following storage system information:
•
IP Address of the storage system
•
Protocol: specify HTTPS
•
Port: 5989
•
Namespace: root/hp/smis or interop.
Troubleshooting
Symptom
You cannot access the SMI-S function.
Action
1. Check the network environment and access destination.
2. If access cannot be made even though there is no problem with the network environment and access
destination, contact Hewlett Packard Enterprise technical support.
Uploading a signed certificate to the SMI-S provider
To use certificates in SSL communication with the SMI-S provider, you must update and upload the
private key and the signed server certificate (public key) to the SMI-S provider to update the certificate.
Use the following procedure to upload and update certificates using a certificate update tool.
Prerequisites
Ensure that the following items have been completed:
Setting up Remote Web Console
29
Advertisement
Table of Contents
