Table of Contents
Advertisement
To use Remote Web Console, click Run in the following dialog box. If you select the Always trust
content from this publisher option before clicking Run, Remote Web Console is always allowed to
access the local files and you will not see this dialog box again.
Figure 28: Warning - Security dialog box when digital signature is expired (for JRE 5.0)
NOTE: The Remote Web Console digital signature has an expiration date and it might be expired
depending on the Remote Web Console version that you use. Even though the digital signature is
expired, you can continue using Remote Web Console.
NOTE: The following Java versions do not allow the Remote Web Consoleseconda ry window to display.
• Java 7 Update 55 or later
• Java 8 Update 5 or later
To start up the window, you need to change Java security settings.
Remote Web Console secondary windows and Modify mode
There is no Modify mode for the Remote Web Console main window. Main window and wizard operations
are queued as tasks and performed in order. However, when using a Remote Web Console secondary
window, you must be in Modify mode before changing any settings. Secondary window operations are not
queued or displayed in the task window.
A secondary window opens when you click a command from the Remote Web Console menu. To make
settings in a secondary window, you must change to Modify mode by clicking
.
Modify mode has a timeout period. If you do not access SVP before the end of the timeout period, Modify
mode is released. On some windows, the settings made but not yet applied to the storage system will be
canceled.
The secondary window displays the progress bar (shown in the following figure) indicating the remaining
time in the timeout period. To extend this period and remain in Modify mode, click Reset.
Figure 29: Modify mode and remaining time in secondary window
Remote Web Console GUI reference (secondary windows)
253
Advertisement
Table of Contents
