Table of Contents
Advertisement
The Modify mode default timeout period is 30 minutes, but can be changed by modifying RMI time-out
period for Modify.
If Modify mode is released due to a timeout, the current window will still be visible, but an error message
is returned after you click Apply, or after you try to refresh the window through File > Refresh All
Refresh View
About window
The About command provides storage system information.
Item
Storage System
Type
Serial Number
IP Address
Storage System
Name
Contact
Location
Main Version
254
Remote Web Console GUI reference (secondary windows)
.
Description
Displays the product name of the connected storage system.
Displays the serial number of the connected storage system.
Displays the IP address of the connected storage system (SVP).
Displays the device name of the connected storage system.
Displays the contact information of the administrator.
Displays the location of the connected storage system.
Displays the version of the microcode installed in the connected storage system.
or
Table Continued
Advertisement
Table of Contents
