Table of Contents
Advertisement
Status
Viewing Remote Web Console data using external
applications
You can load and view Remote Web Console data in external applications such as Hewlett Packard
Enterprise Systems Insight Manager.
To view Remote Web Console data in another application:
Prerequisites
•
The SVP must be configured to load Remote Web Console data to another application. Contact your
service representative.
•
To add an application, you must specify information about the application in the application information
file. Contact your service representative to ask about how to obtain the application information file.
Procedure
1. Open a Remote Web Console window, and select the rows you want to view.
2. Click Settings > Launch Application > Application Name. The application displays the selected
data.
Using reports to verify system changes
This topic explains Remote Web Console reports and provides instructions for creating, viewing, and
deleting them.
Description
The resource can be used normally.
The resource has the following status:
•
The resource can be used, but has a limit on I/O performance and so on.
•
The status of the resource is changing.
•
The status of the resource is being confirmed.
•
The resource has subresources of different status.
For example, parity groups are in this status if the statuses of logical
volumes in the parity groups are not the same.
In this case, the sub-resources might be blocked. Confirm the status of sub-
resources.
The resource has the following status:
•
The resource cannot be used because it is blocked due to a failure or
maintenance operations.
•
The status of the resource is unknown.
Restore the resource to the normal status.
Viewing and managing the storage system
91
Advertisement
Table of Contents
