Table of Contents
Advertisement
Procedure
1. Click a function in the resource tree in the Explorer.
2. If necessary, choose a tab and use a filter to narrow down the items in the table.
3. Select an item in the table, and click a button to open a wizard.
4. Set options in the wizard, and click Finish to confirm the setting.
5. Enter a task name, and click Apply to apply the setting to the storage system. The setting is queued
as a task and performed in order.
TIP: To open the task window after closing the wizard, select Go to tasks window for status,
and click Apply in the wizard.
Figure 21: Using wizard buttons
6. Open the task window to verify the result of the operation. A task can be suspended or canceled if the
processing of the task is not started.
Main window controls
Buttons
The following figure shows the Back and Next buttons that appear at upper left of the main window:
Figure 22: Back and Next buttons in main window
Remote Web Console GUI reference (main window)
153
Advertisement
Table of Contents
