Table of Contents
Advertisement
Error code
Error message
EW_MAXARG
Maximum argument.
Please refer to the help.
EW_REQOPT
Required option list.
Please refer to the help.
EW_SYSERR
System error.
Please call to service center.
EW_SYSERR
Install path is too long.
Specify the install path with up
to 240 bytes.
EW_SYSERR
Certificate file invalid.
Please call to service center.
EW_SYSERR
The file is illegal.
Please move 'raidinfcer' file
from the installation directory.
EW_SYSERR
Log file invalid.
Please call to service center.
EW_UNWCMD
Unknown command.
Please refer to the help.
EW_UNWOPT
Unknown option.
Please refer to the help.
Cause of error and action
The number of parameters of the
command exceeds 10. See Report
Configuration Tool command
reference (raidinf commands) on
page 138 and specify a new
parameter.
The required option and parameters
were not entered. See Report
Configuration Tool command
reference (raidinf commands) on
page 138 and specify a valid option
and parameters.
An internal error occurred. Contact
Hewlett Packard Enterprise technical
support.
The installation path exceeds 240
bytes. Specify no more than 240
bytes.
Updating certificate file fails. Contact
Hewlett Packard Enterprise technical
support.
The installation directory includes a file
that will overlap with another file to be
created by the Report Configuration
Tool and the Report Configuration Tool
cannot start.
Remove the overlapping file from the
installation directory.
The log file cannot be accessed.
Contact Hewlett Packard Enterprise
technical support.
The syntax of the command is not
valid. See Report Configuration Tool
command reference (raidinf
commands) on page 138 and enter a
valid parameter.
The option and parameter are not
valid. See Report Configuration Tool
command reference (raidinf
commands) on page 138 and input a
new option and parameter.
Viewing and managing the storage system
Return
value
131
131
131
131
131
131
131
230
252
Table Continued
101
Advertisement
Table of Contents
