Edit Storage System Window - HPE XP P9000 User Manual

# Item
1 THP Allocated
2 THP Unallocated
Other
3
Virtual Total
4

Edit Storage System window

This window lets you set storage system values. The configured values are required to use SNMP
agents. Make sure to document the information, because the settings will be cleared when the SVP is
replaced.
162 Remote Web Console GUI reference (main window)
Description
• When total is selected in Internal / External:Displays virtual volume
capacity of Thin Provisioning that is defined paths and the number of
logical devices. A virtual volume is not included for either Fast Snap or
Snapshot. A control cylinder is not included in the capacity.
• When the item other than total is selected in Internal /
External:Capacity and the number of logical devices do not display.
• When total is selected in Internal / External:Displays virtual volume
capacity of Thin Provisioning that is not defined paths and the number
of logical devices. A virtual volume is not included for either Fast Snap
or Snapshot. A control cylinder is not included in the capacity.
• When the item other than total is selected in Internal /
External:Capacity and the number of logical devices do not display.
• When total is selected in Internal / External:Displays virtual volumes of
other than Thin Provisioning and the number of logical devices. Control
cylinder is not included in the capacity.
• When the item other than total is selected in Internal /
External:Capacity and the number of logical devices do not display.
Displays total capacity of virtual logical devices and the number of logical
devices. Control cylinder is not included in the capacity.