Raidinf Delete Report - HPE XP P9000 User Manual

Option
servername
<hostname/ipaddress>
[-report <report_name>]
Examples
This example creates a report with the default report name.
# raidinf add report -servername 10.213.74.121
ReportName
101009-CreateConfigurationReport user01
This example specifies the report name 101009-CreateConfigurationReport and creates a report.
# raidinf add report -servername 10.213.74.121 -report
101009-
CreateConfigurationReport
ReportName
CreateTime
101009-CreateConfigurationReport user01
The respective items of the output example are explained next.
• ReportNameThe report name is displayed (up to 32 characters).
• UserNameThe user name is displayed (up to 16 characters). If the user name exceeds 16 characters,
an ellipsis (...) is displayed.
• CreateTimeThe time of creating a report is displayed (up to 9 characters).

raidinf delete report

The raidinf delete report command deletes a report.
If multiple reports of the same name exist, the command deletes the oldest report. If the specified report
does not exist, the command does not do anything and is normally terminated.
Reports created using Remote Web Console can also be deleted.
Syntax
raidinf delete report -servername <hostname/ipaddress>
{-report<report_name> | -report_id
<report_id>} [-fill]
Options and parameters
Description
Specifies the host name or the IP address of the Web server (SVP).
Specifies a report name, up to 32 characters. If you specify more than
32 characters, the 33rd and subsequent characters are ignored.If the
report name is omitted, the default report name YYMMDD-
CreateConfigurationReport is specified. The hyphen (-) cannot
be specified at the beginning of the report name.
UserName
UserName
Report Configuration Tool command reference (raidinf commands)
CreateTime
2010/10/09-12:43:10
2010/10/09-12:43:10
141