HPE XP P9000 User Manual page 147

Remote web console
Table of Contents

Advertisement

<RangeOfVVol>: Specifies a range of virtual volumes
<SingleVVol>: Specifies a single virtual volume
<RangeOfVVol> format
<S2HexLDKC>:<S2HexCU>:<S2HexLDEV>to<E2HexLDKC>:<E2HexCU>:<E2HexLDEV>
<S2HexLDKC>: LDKC number (two-digit hexadecimal) of the first virtual volume in the specified range
<S2HexCU>: CU number (two-digit hexadecimal) of the first virtual volume in the specified range
<S2HexLDEV>: LDEV number (two-digit hexadecimal) of the first virtual volume in the specified range
<E2HexLDKC>: LDKC number (two-digit hexadecimal) of the last virtual volume in the specified range
<E2HexCU>: CU number (two-digit hexadecimal) of the last virtual volume in the specified range
<E2HexLDEV>: LDEV number (two-digit hexadecimal) of the last virtual volume in the specified range
<SingleVVol> format
<2HexLDKC>:<2HexCU>:<2HexLDEV>
<2HexLDKC>: LDKC number (two-digit hexadecimal) of the single virtual volume to be specified
<2HexCU>: CU number (two-digit hexadecimal) of the single virtual volume to be specified
<2HexLDEV>: LDEV number (two-digit hexadecimal) of the single virtual volume to be specified
Example
VVolForSnapshot=00:00:00to00:00:FF,00:02:00,00:04:00to00:04:FF
In this example, a virtual volume having one of the following LDEV IDs is used as the snapshot target:
From 00:00:00 (LDKC=0,CU=0,LDEV=0) to 00:00:FF (LDKC=0,CU=0,LDEV=255)
00:02:00 (LDKC=0,CU=2,LDEV=0)
From 00:04:00 (LDKC=0,CU=4,LDEV=0) to 00:04:FF (LDKC=0,CU=4,LDEV=255)
PoolIDForSnapshot parameter
Use the PoolIDForSnapshot parameter to specify pools that the SMI-S provider can use when you run
Fast Snap or Copy-on-Write Snapshot from CreateElementReplica of ReplicationService.
All pools are specified by default.
Setting up the PoolIDForSnapshot parameter
Set up the parameter by using <RangeOfPoolID> and <SinglePoolID> with a comma (,) as a
delimiter:
<RangeOfPoolID>
: Specifies a range of pool IDs
<SinglePoolID>: Specifies a single pool ID
<RangeOfPoolID> format
SMI-S provider configuration file
147

Advertisement

Table of Contents
loading

Table of Contents