Uploading An Smi-S Provider Configuration File - HPE XP P9000 User Manual

Procedure
1. Terminate all instances of Storage Navigator that are connected to the SMI-S provider.
2. From a PC on which Storage Navigator operates, start a Web browser.
3. Specify the following URL to open the Tool Panel dialog box: https://IP-address-or-host-name-of-
SVP/cgi-bin/utility/toolpanel.cgi
4. In the Tool Panel dialog box, click Update Certificate Files for SMI-S. The login dialog box for Update
Certificate Files for SMI-S opens.
If SSL communication has been established, the Security Alert dialog box opens before the login
dialog box. If so, click OK. If the Security Alert dialog box regarding the certificate opens at other
times, click View Certificate to confirm that the certificate is correct and then click Yes.
5. In the login dialog box for Update Certificate Files for SMI-S, enter the administrator's user ID and
password, and click Login. The upload dialog box for Update Certificate Files for SMI-S opens.
6. In the upload dialog box for Update Certificate Files for SMI-S, click Return to the default
configuration. The execution confirmation dialog box for Update Certificate Files for SMI-S opens.
7. Click OK to update the certificate. Update of the certificate starts.
Upon completion of the certificate update, the SMI-S provider restarts to reflect the update. Upon
completion of the restart of the SMI-S provider, the update completion dialog box for Update Certificate
Files for SMI-S opens.
8. In the update completion dialog box for Update Certificate Files for SMI-S, click OK. The display
returns to the login dialog box.
In some cases, the Security Alert dialog box regarding the certificate may display before the login
dialog box. If so, click View Certificate to confirm that the certificate is correct and then click Yes.
NOTE: If an error occurs during update of the certificate, an error message displays. Resolve the problem
and then run the procedure again, starting with logging in, to update certificate files for SMI-S.

Uploading an SMI-S provider configuration file

You can control the SMI-S function using the SMI-S provider configuration file that you create.
Prerequisites
Ensure that the SMI-S provider configuration file (user-defined.properties) has already been
created. Change the file name to user-defined.properties unless the file is already named that.
Procedure
To upload the SMI-S provider configuration file:
Procedure
1. From a PC on which Storage Navigator operates, start the Web browser.
2. Specify the following URL to open the Tool Panel dialog box.
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
3. In the Tool Panel dialog box, click Update Certificate Files for SMI-S. The login dialog box for
Update Certificate Files for SMI-S opens.
Setting up Remote Web Console 31