HPE XP P9000 User Manual page 256

Item
License Install
License Status
Install
Remove
Apply
Cancel
256 Remote Web Console GUI reference (secondary windows)
Description
Allows you to select one of the following modes for installing a license key:
• After Key Code mode is selected, use the Key Code text box to type the license
key code for the selected option to be installed.
• After File mode is selected, use the File Name text box or the Browse button to
enter the name of the license key file. After you click Browse, a dialog box
opens allowing you to select the desired license key file.
• Select Available to update the license status when the license capacity is
enough but the license status still displays Grace Period or Not Enough
License. The Available button can be used only when the licensed capacity
exceeds the mounted (or used) capacity because the LDEVs are reduced, or
because the pairs are deleted by a software.
Allows you to enable or disable a software. Select a software, select Enable or
Disable, and click Set.
• Enable
: You can use the software. If you enable a software with the term key, the
available days of term key will lessen one day after you set Enable. After the
setting is applied, Installed appears.
• Disable
: You cannot use the software. If you disable a software with the term key, the
available days of term key will not lessen when you set Disable. After the setting
is applied, Installed (Disabled) appears.
Install
appears in the row of the selected software. The software are not actually installed
until you click Apply.
Remove
appears in the row of the selected software. The options are not actually removed
until you click Apply.
Implements the settings to the storage system. The status of installed options
changes to Installed, and the status of uninstalled option changes to Not
Installed.
Cancels the settings.