Table of Contents
Advertisement
Item
External User Group
Mapping - Search User's
DN
External User Group
Mapping - Password
External User Group
Mapping - Timeout
External User Group
Mapping - Retry Interval
External User Group
Mapping - Number of
Retries
Setup Server for Kerberos
238
Remote Web Console GUI reference (main window)
Description
Search for a user by specifying a DNAvailable characters: Alphanumeric
characters (ASCII characters) and all symbols.
If you specify sAMAccountName in External User Group Mapping - User
Name Attribute, or if you select Enable in External User Group Mapping, this
item must be specified.
If you select Disable in External User Group Mapping, this item is disabled.
You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each symbol:+ ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.
•
\ -> \5c (hexadecimal)
•
/ -> \2f (hexadecimal)
•
"-> \22 (hexadecimal)
Displays asterisks (*) to mask the password of the user for searching.
Displays the number of seconds before connection to the LDAP server times
out.
Displays the retry interval in seconds when the connection to the LDAP server
fails.
Displays the retry times when the connection to the LDAP server fails.
Advertisement
Table of Contents
