Table of Contents
Advertisement
If you want to enable TLSv1.0 and TLSv1.1 communications, contact Hewlett Packard Enterprise
technical support.
Blocking HTTP communication to the storage system
If the Web server (SVP) supports SSL (HTTPS), the HTTP setting tool allows you to block access to port
80. When you block access to port 80, the connection used to import the certificate from the Web browser
to the Web server (SVP) occurs on port 443 (HTTPS).
If you are using Command View Advanced Edition to access Remote Web Console, blocking HTTP
communication might interfere with that access. Make sure the Command View Advanced Edition can
use SSL communication to access Remote Web Console.
To block HTTP communication:
Procedure
1. Log off all Remote Web Console Web clients attached to the SVP.
2. Start both the Remote Web Console Web client and Web browser.
3. Specify the URL as follows:
https://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
4. In the Tool Panel dialog box, click Set up HTTP Blocking.
5. Enter the User ID and Password for the storage administrator, then click Logon. The Set up HTTP
Blocking dialog box appears.
6. Click OK. A confirmation dialog box appears.
7. Click OK to implement HTTP blocking. When the configuration change is complete, the SVP reboots.
Once the reboot is complete, the HTTP Communications Blocked dialog box appears. If you want to
cancel the operation and return to the logon dialog box, click Cancel.
It may take 30 or 60 minutes for the Web server to restart. In this case, the HTTP Communications
Blocked dialog box does not appear and an internal server error occurs, but the setting is actually
completed.
8. Click OK. You return to the logon dialog box.
Releasing HTTP communication blocking
To release the HTTP communication blocking:
Procedure
1. Log off of all Remote Web Console Web clients attached to the SVP.
2. Start both the Remote Web Console Web client and Web browser.
3. Specify the URL as follows:
https://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
4. In the Tool Panel dialog box, click Release HTTP Blocking.
20
Setting up Remote Web Console
Advertisement
Table of Contents
