Table of Contents
Advertisement
Prerequisites
•
You must have Security Administrator (View & Modify) role to perform this task.
•
The names of built-in groups cannot be changed.
•
A user group name consists of 1 to 64 characters, including alphanumeric characters (ASCII), spaces,
and the following symbols: # $ % and ' ( ) + - . = @ [ ] ^ _ ` { } ~
Procedure
1. In the tree, click Administration > User Groups.
2. From the User Groups tab, select the user group, and then, click More Actions > Edit User Group to
open the Edit User Group window.
3. In the Edit User Group window, enter a new user group name.
4. If you use an authorization server, click Check, and verify that the entered user group name is
registered in the authorization server.
5. Click Finish.
6. Specify a task name, and click Apply.
Changing user group permissions
This topic explains how to change the permissions that are assigned to user groups.
Prerequisites
•
You must have Security Administrator (View & Modify) role to perform this task.
•
The permissions of a built-in group cannot be changed.
Procedure
1. In the tree, click Administration > User Groups.
2. From the User Groups tab, select the user group, and then, click More Actions > Edit Role
Assignment.
3. From the Edit Role Assignment window, change roles to be assigned to the user group.
•
Select roles to add, and then, click Add.
•
Select a role to remove, and then, click Remove.
4. Click Finish.
5. Specify a task name, and click Apply.
CAUTION: For the user groups whose roles are other than the Storage Administrator, All Resource
Groups Assigned is automatically set to Yes. If you delete all the roles except the Storage
Administrator, reassign resource groups to the user group because All Resource Groups Assigned
is automatically set to No. To assign resource groups to the user group, see Changing resource
groups assigned to a user group on page 63.
62
Setting up and managing user accounts
Advertisement
Table of Contents
