Table of Contents
Advertisement
Option
servername
<hostname/ipaddress>
{-report <report_name> | -
report_id <report_id>}
[-fill]
Examples
This example specifies the report name 101009-CreateConfigurationReport and deletes the
report.
# raidinf delete report -servername 10.213.74.121 -report 101009-
CreateConfigurationReport
101009-CreateConfigurationReport is deleted in the SVP (Web server).
raidinf download report
The raidinf download report command downloads a report.
Reports created by Remote Web Console can also be downloaded. The report in process of creation
cannot be downloaded.
The name of the downloaded file is Report_report name.tgz . Note that the files are overwritten if
reports of the same name has already existed.
Example: the name of the downloaded file when the report name is 110309-
CreateConfigurationReport
Report_110309-CreateConfigurationReport.tgz
Syntax
raidinf download report -servername <hostname/ipaddress>
{-report <report_name> | -report_id <report_id>}
-targetfolder <folder>
Options and parameters
142
Report Configuration Tool command reference (raidinf commands)
Description
Specifies the host name or the IP address of the Web server (SVP).
Specifies either -report or -report_id.
•
-report
specifies a report name (up to 32 characters). If you specify more
than 32 characters, the 33rd and subsequent characters are
ignored.
•
-report_id
specifies a report ID displayed by the report list. Because a report
ID is a unique ID to each of the reports, a specific report can be
identified even if reports of the same name exist.
Deletes the report only if the total number of reports is 20. In there are
less 20 reports, the specified report is not deleted even if it exists.
Advertisement
Table of Contents
