Table of Contents
Advertisement
1. Open a command prompt.
2. Move the current directory to the folder to which the key file is output (such as c:\key). Execute the
following command:
c:\key > c:\openssl req -sha256 -new -key server.key -config c:\openssl\bin
\openssl.cfg -out server.csr
3. Enter the following information in the prompt:
•
Country Name (two-letter code)
•
State or Province Name
•
Locality Name
•
Organization Name
•
Organization Unit Name
•
Common Name
To create a self-signed certificate, enter the IP address of the web server (SVP). To obtain a signed
and trusted certificate, ensure that the server name is the same as the host name of the storage
device.
•
Email Address
•
Challenge password (optional)
•
Common name (optional)
Prerequisites
Before you begin, download openssl.exe from the OpenSSL Website.
An example of a command prompt when you create a public key is shown in the following figure.
Figure 3: Creating a public key
16
Setting up Remote Web Console
Advertisement
Table of Contents
