Table of Contents
Advertisement
<Start PoolID>to<End PoolID>
•
<Start PoolID>
: ID of the first pool in the specified range
•
<End PoolID>
: ID of the last pool in the specified range
<SinglePoolID> format
<PoolID>
<PoolID>
: ID of the pool to be specified
Example
PoolIDForSnapshot=1to2,4,6to8
In this example, pools having one of the following pool IDs are used as snapshot pools:
•
1 to 2
•
4
•
6 to 8
DefaultSnapshotFunction parameter
Use the DefaultSnapshotFunction parameter to specify either Fast Snap or Copy-on-Write
Snapshot from CreateElementReplica of ReplicationService. Copy-on-Write Snapshot is specified by
default.
Table 45: Values for the DefaultSnapshotFunction parameter
Value
FS
COW
Setting up the PoolIDForSnapshot parameter
Specify FS or COW.
Example
DefaultSnapshotFunction=COW
148
SMI-S provider configuration file
Description
Enables Fast Snap
Enables Copy-on-Write Snapshot
Advertisement
Table of Contents
