Table of Contents
Advertisement
Item
External User Group
Mapping - Search User's DN
External User Group
Mapping - Password
External User Group
Mapping - Timeout
External User Group
Mapping - Retry Interval
External User Group
Mapping - Number of Retries
External User Group
Mapping - Secondary Port
Number
Setup Server
Setup Server for LDAP
222
Remote Web Console GUI reference (main window)
Description
Search for a user by specifying a DNAvailable characters: Alphanumeric
characters (ASCII characters) and all symbols.If you specify
sAMAccountName in External User Group Mapping - User Name
Attribute, or if you select Enable in External User Group Mapping, this
item must be specified.If you select Disable in External User Group
Mapping, this item is disabled.You can enter alphanumeric characters
and all symbols. Note, however, that when you enter symbols like the
following, you need to use a backslash to escape for each symbol:+ ; , <
= > \ / "In some cases, you may need to use a backslash and an ASCII
character to escape.
•
\ -> \5c (hexadecimal)
•
/ -> \2f (hexadecimal)
•
"-> \22 (hexadecimal)
Displays asterisks (*) to mask the password of the user for searching.
Displays the number of seconds before connection to the LDAP server
times out.
Displays the retry interval in seconds when the connection to the LDAP
server fails.
Displays the retry times when the connection to the LDAP server fails.
Displays the port number of the secondary LDAP server.
Displays the Setup Server window.
Advertisement
Table of Contents
