HPE XP P9000 User Manual page 245

Item
External User Group
Mapping - Primary Port
Number
External User Group
Mapping - Base DN
External User Group
Mapping - Search User's
DN
External User Group
Mapping - Password
External User Group
Mapping - Timeout
External User Group
Mapping - Retry Interval
Description
Displays the port number of the LDAP server.
Specify a base DN to search for users to authenticate.
Available characters: Alphanumeric characters (ASCII characters) and all
symbols.
• Hierarchical model: Specify a DN of hierarchy that includes all the targeted
users for searching.
• Flat model: Specify a DN of hierarchy that is one level up of the targeted
user for searching.
You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each symbol:+ ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.
• \ -> \5c (hexadecimal)
• / -> \2f (hexadecimal)
• "-> \22 (hexadecimal)
Search for a user by specifying a DNAvailable characters: Alphanumeric
characters (ASCII characters) and all symbols.
If you specify sAMAccountName in External User Group Mapping - User
Name Attribute, or if you select Enable in External User Group Mapping, this
item must be specified.
If you select Disable in External User Group Mapping, this item is disabled.
You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each symbol:+ ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.
• \ -> \5c (hexadecimal)
• / -> \2f (hexadecimal)
• "-> \22 (hexadecimal)
Displays asterisks (*) to mask the password of the user for searching.
Displays the number of seconds before connection to the LDAP server times
out.
Displays the retry interval in seconds when the connection to the LDAP server
fails.
Remote Web Console GUI reference (main window)
Table Continued
245