General Instructions - AEMC OX III Series User Manual

General Instructions

Introduction
Precautions and
safety measures
Shop for AEMC products online at:
I - 4
Congratulations ! You have just purchased a portable digital oscilloscope.
Thank you for your trust in the quality of our products.
Here is the family of instruments to which it belongs:
color
III
OX 7102
color
III
OX 7104
color
III
OX 7202
color
III
OX 7204
All instruments in this range are equipped with Micro SD card.
This oscilloscope also offers the following modes:
•
FFT Analyzer
•
Multimeter/Wattmeter
•
Harmonic Analyzer
•
Recorder
It complies with safety standard NF EN 61010-1 (2001), double insulation,
relative to electronic measuring instruments.
For optimum service, read this manual carefully and comply with the
operating precautions.
Non-compliance with the warnings and/or operating instructions might
damage the instrument and/or its components and could prove dangerous
for the user.
•
This instrument has been designed for use:
- indoors
- in an environment with pollution level 2
- at an altitude of less than 2000 m
- at a temperature between 0°C and 40°C
- with relative humidity of less than 80% up to 31°C.
•
The safety of any system integrating the apparatus concerns the
responsibility of the assembler of the system.
•
It can be used for measurements on circuits 600V CAT III, 1000V CAT II
in relation to earth and can be powered by a 98 to 264V mains network,
with an external power supply. However, some accessories can lead you
to use this instrument on circuits of lower voltage and category.
Conform the given values when connecting the accessory.
ShopAEMC
www.
2-channel 100 MHz
4-channel 100 MHz
2-channel 200 MHz
4-channel 200 MHz
.com 1.877.766.5412
General Instructions
2.5 GS/s sample
2.5 GS/s sample
2.5 GS/s sample
2.5 GS/s sample
SCOPIX