AEMC OX III Series User Manual page 106

Multimeter Mode (cont'd)
4. Bargraph
5. Graphic window
6. Current settings
Shop for AEMC products online at:
V - 106
These graphs show the min. and max. values measured on the channels in the
range during the observation period.
The bargraph is shown with the color of the channel.
The zero level of the bargraph and the scale are adapted to suit the type of
measurement and the range.
If the range is changed, the bargraph is reinitialized and the curve showing the
evolution of the measurement is erased.
This window shows the evolution of the measurements as a function of time.
The most recent measurement points are those on the right-hand side of the
screen.
Depth of the
display
window
The depth of the window, which represents the observation period, can be
programmed using the keys opposite.
Adjustments possible: 5', 15', 30', 1hr, 6hrs, 12hrs, 24hrs, 1 week, 1 month.
If ROLL mode is activated (see §. "HORIZ" menu), the curves are
constantly updated; if the acquisition memory is full, the oldest
measurements disappear and are replaced by recent measurements.
Identical to OSCILLOSCOPE mode: indication and adjustment of the value of
the latest parameter modified.
ShopAEMC
www.
Multimeter Mode - Display
.com 1.877.766.5412
Last
point
acquired
Cursor
SCOPIX