Applications (cont'd)
Reminder
Shop for AEMC products online at:
IX - 176
• Select the trigger mode:
Trig. Menu
Automatic mode
or using the SGLE REFR key.
• Use the RUN HOLD key to start acquisition (RUN mode)
or use the time base menu.
The acquisition status (Ready, RUN, STOP) is indicated on the right, under
the display of the trace, in the trigger status display zone.
• Optimize the time base speed to observe several complete TV lines.
Example of a video signal
Use the manual cursors to check the duration of a line.
• Display the manual cursors:
Menu
Measure
• To move the cursors freely, select:
Measure Menu
• Use the stylus to position cursors 1 and 2 on the start and end of the
signal, respectively.
The measurements between the 2 cursors are indicated under the curve
display.
Example: dt = 64.00 µs = duration of a line
ShopAEMC
www.
Manual measurements (dt, dv)
or using the key opposite.
Unattached cursors.
.com
Applications
1.877.766.5412
SCOPIX