Description Of Accessories - AEMC OX III Series User Manual

100/200mhz portable oscilloscopes
Table of Contents

Advertisement

Description of Accessories

Description of Accessories
Concept
Shop for AEMC products online at:
SCOPIX
The portable oscilloscopes in this range use Probix intelligent probes and
adapters, offering users active safety.
When connected to an oscilloscope input, a safety message in English
concerning the probe or adapter used indicates:
its maximum input voltage according to the category
its maximum voltage in relation to the earth, according to the category
its maximum voltage between channels, according to the category
its type
its basic specifications
the use of suitable safety leads.
For user and instrument safety, this information must be respected.
Some probes are equipped with buttons whose assignment can be
programmed.
The color of the signal measured with a particular accessory is
parameterized in the "Green"
interchangeable elastic band or plastic ID markers can be used to match the
probe color to the curve color.
The scaling and the units are managed automatically by the Probix system, thus
allowing fast measurements and without risk of error.
The oscilloscope provides the power supply for the probes and adapters.
Recommendations for use: see p. 39.
ShopAEMC
www.
"chX"
"Probix" menu. An
.com
1.877.766.5412
III - 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ox 7202 iiiOx 7102 iiiOx 7104 iiiOx 7204 iii

Table of Contents