AEMC OX III Series User Manual page 74

Oscilloscope Mode (cont'd)
Example
Shop for AEMC products online at:
IV - 74
Signal injected on CH1: a train of five 6 V
The trigger is set on the descending edge.
The first edge activates the trigger. It is not included in the count.
The trigger is triggered on the third descending edge of the pulse train.
The Holdoff stabilizes the signal by disabling the trigger for 232 µs.
ShopAEMC
www.
Oscilloscope Mode - The "Trigger" Menu
pulses at a frequency of 20 kHz
DC
separated by 500 µs.
.com 1.877.766.5412
SCOPIX