AEMC OX III Series User Manual page 6

General Instructions (cont'd)
Warranty
Maintenance and
metrological
verification
Unpacking -
Repacking
Repair
Shop for AEMC products online at:
I - 6
This equipment is guaranteed for 3 years against any defect in materials or
workmanship, in accordance with the general terms and conditions of sale.
During this period, the equipment can only be repaired by the manufacturer .
The manufacturer reserves the right to carry out repair or replacement of
all or part of the equipment. If the equipment is returned to the
manufacturer, initial transport costs shall be borne by the customer.
The warranty does not apply following:
unsuitable use of the equipment or use with other incompatible
•
equipment
modification of the equipment without explicit authorization from the
•
manufacturer's technical services
repair carried out by a person not certified by the manufacturer
•
adaptation to a specific application, not provided for in the definition of
•
the equipment or by the operating manual
an impact, a fall or a flooding.
•
Before the equipment is opened, it must be disconnected from the mains
supply and the measurement circuits, and the operator must not become
charged with any static electricity. This could cause the destruction of
internal parts.
Any adjustment, servicing or repair of the unit under power must be
undertaken only by qualified personnel, after reading the instructions in this
manual.
A qualified person is a person who is familiar with the installation, its
construction, its use and the hazards that exist. They are authorized to
activate and deactivate the installation and equipment, in compliance with
the safety instructions.
As for all surveying equipment, yearly metrological checks are necessary.
These checks can also be done as part of preventative maintenance.
Information and contact details : contact your nearest distributor.
All the equipment was verified mechanically and electrically before
shipping.
When you receive it, carry out a quick check to detect any damage that
may have occurred during transport. If necessary, contact our sales
department immediately and register any legal reservations with the carrier.
In the event of reshipping, it is preferable to use the original package.
Indicate the reasons for the return as clearly as possible in a note attached
to the equipment.
For all repairs before or after expiration of warranty, please return the
device to your distributor.
ShopAEMC
www.
General Instructions
.com 1.877.766.5412
SCOPIX