Technical Specifications
Technical Specifications (cont'd)
« Oscilloscope » Function
Processing of measurements
Mathematical functions
Automatic
measurements
Resolution of the measurements
Measurements by cursors or automatic
measurements
DC vertical measuremens accuracy
Accuracy of 2-cursor time measurements
Shop for AEMC products online at:
SCOPIX
Equation editor (functions on channels or simulated)
Addition, subtraction, multiplication, division and complex
functions between channels.
Time measurements
negative pulse
12 bits / display on 4 digits
± [1 % (reading - offset) + vertical offset accuracy + (0.05 div.) +
(V/div.)]
± [0.02 x (t/div.) + 0.01 % (reading) + 1 ns]
The cursors are attached to the trace, but they can be detached
to perform a measurement between channel (offset, delay, etc.)
In XY mode, the cursors are not attached to the trace.
ShopAEMC
www.
rise time
fall time
positive pulse
cyclic ratio
period
frequency
phase.
counting
integral
.com
1.877.766.5412
Level measurements
DC voltage
rms voltage
peak-to-peak voltage
amplitude
max. voltage
min voltage
high plateau
low plateau
overshoot
X - 205