Technical Specifications (cont'd)
« Oscilloscope » Function
Trigger circuit
Characteristics
Trigger sources
Trigger mode
Bandwidth on
trigger
without bandwidth
limit
Trigger slope
Trigger sensitivity
(noise rejection mode)
Noise rejection
Trigger level
Variation range
Trigger type
HOLDOFF
Shop for AEMC products online at:
X - 202
OX 7102
AC
10 Hz to 100 MHz
DC
0 Hz to 100 MHz
HF reject
0 Hz to 10 kHz
BF reject
10 kHz to 100 MHz
With bandwidth limitation activated, the bandwidth is limited too.
1,2 div. peak to peak
from DC to 40 MHz
on edge
on pulse width
Trigger after delay
Trigger after counting
TV on CH1 only :
ShopAEMC
www.
III
III
- OX 7104
CH1, CH2, CH3, CH4 (OX 7x04)
CH1, CH4 (OX 7x02)
Automatic
Triggered
Single shot
Auto Level 50 %
Falling or rising edge
1,2 div. peak to peak from DC to 50 MHz
≈ ± 1.5 div.
± 10 div.
Trigger source : CH1 (CH2) (CH3) CH4
∈
< T1 ; >T1 ;
with T1 and T2
- of 48 ns to 20 s
- qualifier source : CH1 (CH2) (CH3) CH4
- trigger source :
- 3 to 16,384 events
- qualifier source : CH1 (CH2) (CH3) CH4
- counting source : CH1 (CH2) (CH3) CH4
- trigger source : qualifier or counting source
- selection of line number and polarity,
with 525 lines (PAL) and 625 lines (SECAM),
- even or odd line field
- TV trigger sensitivity : > 1 div.
adjustable from 64 ns to 15 sec.
.com
Technical Specifications
III
OX 7202
- OX 7204
10 Hz to 200 MHz
0 Hz to 200 MHz
0 to 10 kHz
10 kHz to 200 MHz
2,4 div. peak to peak from
50 MHz to 200 MHz
∉
T1,T2] ;
T1,T2]
∈ (
from 16 ns to 20 s)
CH1 (CH2) (CH3) CH4
1.877.766.5412
III
SCOPIX