AEMC OX III Series User Manual page 58

Oscilloscope Mode - The "Vertical" Menu
Oscilloscope Mode (cont'd)
Examples
• Predefined divv() function used on its own: math3 = divv(3).
Use of predefined
mathematical
functions
The trace is equal to 3 vertical divisions.
•
Predefined step() function associated with a trace:
- math2 = ch1*step(t-divh(4))
The result of math2 is 0 vertical divisions as long as t is less than
four horizontal divisions (t-divh(4) < 0).
The result of math2 is equal to ch1 when t becomes greater than
four horizontal divisions (t-divh(4) > 0).
- math2 = ch1*step(divh(4)-t)
The result of math2 is equal to ch1 as long as t is less than four
horizontal divisions (t-divh(4) > 0).
the result of math2 is at 0 vertical divisions when t becomes greater
than four horizontal divisions (t-divh(4) < 0).
ShopAEMC
www. .com 1.877.766.5412
Shop for AEMC products online at:
IV - 58 SCOPIX