Keys - AEMC OX III Series User Manual

Recorder Mode
The Keys
5 "UTILITY" keys
(or keypad)
1 "AUTOSET" key
Selective
"AUTOSET"
+
4 "TRIGGER" keys
Shop for AEMC products online at:
VII - 128
It is best if the oscilloscope is plugged into the mains to operate in this
mode (battery life).
This key selects "Recorder" mode.
LCD light setting (see "Oscilloscope" mode).
Full screen display (see "Oscilloscope" mode).
Take a screen shot (see "Oscilloscope" mode).
No action.
(Pressing this key displays the message: "Impossible in this mode!").
No action.
(Pressing the key displays the message: "Impossible in this mode!").
No action.
(Pressing the key displays the message: "Impossible in this mode!").
No action.
(Pressing the key displays the message: "Impossible in this mode!").
Successively pressing the key toggles though the different types of trigger of
the last channel selected (see § Trigger Menu).
No action.
(Pressing the key displays the message: "Impossible in this mode!").
This key has two functions:
RUN = launches an acquisition
HOLD = stops an acquisition
If the recorder is in memory display (see §. Memory Menu
message "Impossible in this mode!" appears when this key is pressed.
ShopAEMC
www.
Recorder Mode - Keys
Recall ".REC"), the
.com 1.877.766.5412
SCOPIX