AEMC OX III Series User Manual page 198

Applications (cont'd)
Oscilloscope
Configuration
Shop for AEMC products online at:
IX - 198
To configure your oscilloscope correctly you must have the following
information available:
• Your PC's IP address, which you can see in the box at the bottom of
the software
In our example: "14.3.212.21"
• The name of the virtual printer created earlier: "Test"
On SCOPIX, in: Util
On SCOPIX, in: Util
Choose either "bitmap BMP" or "GIF" format.
Select the "Network (LPD)"port.
Close the dialogue box using "OK".
ShopAEMC
www.
I/O Port Config Network
Hardcopy
.com
Applications
1.877.766.5412
SCOPIX