AEMC OX III Series User Manual page 137

Recorder Mode - Display
Recorder Mode (cont'd)
Menu accessible
from display area
Zoom creation in
Fault Capture mode
Case 1
Shop for AEMC products online at:
SCOPIX
Like in "Oscilloscope" mode, the menu concerning the display can be opened
directly by double-tapping with the stylus in the display area.
This menu, as well as the functions of the proposed options, are identical to
those in "Oscilloscope" mode.
The horizontal zoom is disabled, the screen displays 10 faults:
Draw a rectangle around the part you wish to zoom in on. The screen displays,
with a vertical zoom, the fault on which you began the rectangle.
Fault 5 is
magnified.
Fault 5 is displayed in full screen mode and has
To return to a normal display (10 faults displayed on the screen), select
"Disable zoom" in the menu,
Disabling the horizontal zoom with the zoom ON/OFF key allows the user
to return to a screen with the ten faults displayed, while not disabling the
vertical zoom.
ShopAEMC
www.
been vertically magnified
.com 1.877.766.5412
VII - 137