AEMC OX III Series User Manual page 132

Recorder Mode (cont'd)
1. Status area
Standard
configuration
Time of acquisition of 1st
sample viewable in the
displayed window
Move to the left in
the acquisition
memory
Screen position in the
acquisition memory
Configuration if
delayed start-up is
enabled
Shop for AEMC products online at:
VII - 132
Three pieces of general information appear in this area:
• The bargraph, representing the screen position and the cursors in the
acquisition memory;
• Instrument settings (fault capture mode, zoom, etc.);
• Acquisition times:
of the first sample that can be viewed,
of the sample under the main cursor,
of the sample under the auxiliary cursor.
Time of acquisition of
sample located under
the main cursor
10:23:10
Display in fault capture
mode
Delayed start-up time
10:23:10
When the acquisition starts, the display returns to its standard configuration.
ShopAEMC
www.
Time of acquisition of sample
located under the auxiliary
cursor
13:23:25
1 2
Position of main/auxiliary
cursors in the acquisition
memory
------------
2
1
.com
Recorder Mode - Display
The curves displayed
are stored in the
memory
17:14:20
Move to the
right in the
acquisition
memory
Zoom active
------------
1.877.766.5412
SCOPIX