AEMC OX III Series User Manual page 88

Oscilloscope Mode (cont'd)
Unattached manual
cursors
Shop for AEMC products online at:
IV - 88
Used for linking or not linking the manual measurement cursors (1 and 2)
to the reference trace.
When the "Unattached cursors" menu is selected, cursors 1 and 2 can
be moved freely over the whole screen.
• The " " symbol indicates that the "Unattached cursors" menu is active.
• To deactivate this menu, deselect it by pointing with the stylus.
In the case of "Automatic measurements" and manual measurement
activation:
If ...
... the manual cursors and the
automatic markers are
displayed together,
... the portion defined between
the manual cursors is too
small [in this case, the fixed
markers (+) will not be
displayed],
Deselect the automatic measurements to validate the manual
measurements (dt, dv).
ShopAEMC
www.
Oscilloscope Mode - The "Measure" Menu
then ...
... the automatic measurements
are performed on the portion of the
trace defined between the manual
cursors.
... the automatic measurements
selected are impossible, so "-.--" is
indicated in the measurement
display area.
.com 1.877.766.5412
SCOPIX