AEMC OX III Series User Manual page 159

HTTP and FTP Server
2 - ScopeNet (cont'd)
"OSCILLOSCOPE"
Mode
The
measurements
are displayed by
taking into
account the
scale ratios of
the reference
curve
Result of the
measurements
made using
cursors 1 and 2
Button giving
access to the
automatic
measurements
on the reference
channel
Shop for AEMC products online at:
SCOPIX
Possibilities using this mode:
Visualization of the curves as they are displayed on the instrument
Adjustment of all vertical, horizontal settings, ...
Measures by cursor, relative to a reference curve
Automatic measurements (using samples located between the
cursors)
Status bar:
- various messages
- state of the battery
- trigger state
The indicators located on the left, on the top and at the right of the screen
can be relocated by selecting them with the mouse:
Use the left hand indicators to remove channel bounds.
Use the right hand indicators to set the trigger levels.
Use the top indicator to set the trigger time setting.
Zoom on a part of the screen: use the mouse to select the zone to zoom on,
it appears surrounded by a dotted line on the screen.
ShopAEMC
www. .com 1.877.766.5412
Time location of the
trigger
VIII - 159