AEMC OX III Series User Manual page 186

Applications (cont'd)
Triggering after
adjustment window
Resulting Curve
Shop for AEMC products online at:
IX - 186
Adjust the position of the vertical position indicator of channel CH1 to
-149°C, as follows:
•
Press key CH1, then on the keys opposite. The position of the indicator
is displayed at the bottom right of the screen.
•
Apply the end of the temperature probe to the end of the soldering iron.
•
When the end is in position, launch acquisition using the key opposite.
•
Connect the soldering iron.
This acquisition shows the heating dynamic of the soldering iron.
ShopAEMC
www. .com 1.877.766.5412
Applications
SCOPIX