Table of Contents
Advertisement
Oscilloscope Mode - Display
Oscilloscope Mode (cont'd)
2. Control area
Shop for AEMC products online at:
SCOPIX
The parameters displayed in this area are:
• The parameters of each channel and trace: display, sensitivity, coupling,
bandwidth limitation, vertical scale, function, Zoom.
• The time base value, the presence of a Zoom and a change in the signal
representation domain (FFT).
• Active adjustment of the last selected element:
trigger level
trigger time position
channel offset value
X & Y position of cursor
•
Time display, if no measurement has been selected.
•
Display of the battery status.
•
A mains socket if the instrument is connected to the Wall Plug.
Light
25.0 %
•
The channels and functions can be validated using the stylus or the keys.
•
The " " symbol indicates whether a channel or function is selected, or
whether FFT mode is selected.
•
The settings of the time base (or the frequency) and the value of the active
parameter can be modified using the UP/DOWN button next to the display of
the current value.
•
After modification of the time base, the corresponding sampling frequency
is indicated in the settings area.
•
A double press on the parameters or a channel or on the value of the time
base directly opens the associated menus:
Sensitivity/Coupling and Vertical Scale, for the channels
-
Vertical scale for the functions
-
-
Source, trigger mode and RUN/STOP, for the time base.
ShopAEMC
www.
Display of the trace parameters (in the
color of the trace):
validity, coupling, bandwidth limitation,
sensitivity
Display of ZOOM mode
or
Display of the math function parameters
(in the color of the trace):
validity, value of one division
Display of ZOOM mode
or
Display of memories (M): validity
Value of time base coefficient (s/div) in
oscilloscope mode or of the frequency
(Hz/div) in FFT mode
Change of signal representation domain
(FFT selection)
Indication and adjustment of last setting
selected
.com
1.877.766.5412
IV - 49
Advertisement
Table of Contents
