AEMC OX III Series User Manual page 144

Recorder Mode (cont'd.)
Display
(fault capture,
file capture)
Horizontal zoom
disabled
Horizontal zoom
enabled
Shop for AEMC products online at:
VII - 144
Two cases arise:
the horizontal zoom is enabled,
•
the horizontal zoom is disabled.
•
Modification of display:
The cursors are no longer displayed.
•
The measurements displayed do not have the same significance.
•
All the measurements are related to the current recording.
•
Current
recording
Acquisition time
of first viewable
sample
"Trigger time" and "Sample value at trigger time" measurements are only
•
displayed if the trigger has taken place.
Maximum and minimum searches cannot be enabled (see §. Display Menu,
•
p. 146).
The automatic measures cannot be enabled (see §. Measurement Menu,
•
p. 148).
The display is identical to normal mode.
The measurements displayed have the same significance as in normal mode
•
(see §. Display, p. 146).
Maximum and minimum searches are possible (see §. Display Menu, p. 146).
•
Automatic measurements can be enabled (see §. Measurement Menu, p. 148).
•
ShopAEMC
www.
Recorder Mode - The "Trigger" Menu
Acquisition
time of last
Trigger time
acquired
sample
.com 1.877.766.5412
Value of
last
acquired
sample
Value of
sample at
time of
trigger
faults
SCOPIX