AEMC OX III Series User Manual page 215

Technical Specifications
Technical Specifications (cont'd)
Communication interfaces
link configuration
ETHERNET
ETHERNET
Interface Connector
Remote programming of the instrument by a PC
Shop for AEMC products online at:
SCOPIX
The oscilloscope can communicate with a computer via USB, using
USB
the adapter HX0084.
Interface
Selection of speed in Bauds
RS232C
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity selection
None, even, odd
Word length selection
8 bits or 7 bits
Stop bit number selection
1 or 2 stop bits
Protocol selection
Hard (for RTS and CTS lines)
Soft (for XON and XOFF characters)
None (no protocol)
Type
Lead
Interface
Standard
Double insulation 600 V CAT III, 1000 V CAT II / inputs
RS232
with : 1 USB / RS232adapter (HX0084)
1 RS232C interface cord (HX0042)
1 ETHERNET crossed interface cord (HX0040)
•
•
•
Refer to the remote programming manual for the list of commands.
ShopAEMC
www.
10BASE-T (Twisted Pair)
Interface scope / RJ45 8 count
IEEE 802.3
Programming of the instrument via the RS232C or
ETHERNET interface with SCPI commands
IP protocol available on ETHERNET: FTP client, FTP
server, HTTP server, LPD client, DHCP client.
Specific protocol on ETHERNET ScopeAdmin Client
.com 1.877.766.5412
X - 215