Vertical" Menu - AEMC OX III Series User Manual

Multimeter Mode (cont'd)
The "Vert" Menu
ch1 ch2
ch3 ch4
Sensitivity/Coupling
Range
Shop for AEMC products online at:
V - 108
Modification of:
the parameters of channels ch1, ch2, ch3 and ch4, independently
•
the vertical scale of the selected trace
•
the parameters of the Probix probe connected.
•
Modifies the parameters of the selected channel.
Each measurement display zone on the main screen indicates the
coupling and bandwidth limitation parameters used on each channel.
Choice of the measurement range. The unit displayed depends on:
• the type of measurement selected: amplitude (available on all
channels), ohmmeter, continuity, capacimeter, PT100 temperature
probe (available only on channel 1, see §. Measure Menu),
• the Probix probe connected to the input,
• the parameters of the "Vertical Scale" menu (if they have been
modified since connection of the Probix probe).
For the ranges available for each type of measurement, refer to the technical
specifications of the "Multimeter" function.
The Range / Coupling menu is displayed in light grey when the range is not
modifiable (single range).
ShopAEMC
www.
Multimeter Mode - The "Vertical" Menu
.com 1.877.766.5412
SCOPIX